Cinipol® Red DR1P
Cinipol® Red DR1P is a yellowish shade red with good lightfastness and excellent heat resistance. Where “Halogen free” solutions are required, Cinipol® Red DR1P is the best product. This colorant is specially of interest for Polyamide 6/ Polyamide 66 fiber applications.
-
C. l. NameSolvent Red 179
-
C. I. No.564150
-
CAS No.6829-22-7
-
Chemical ClassPerinone
Full Shade in PS (0.05%)
1/3 ISD in PS
(0.15% + 1.0% TiO2)
-
Physical Data
-
Regulatory Compliance
-
Heat Resistance
-
Solubility
-
Fastness Properties
-
Applications
| Bulk Density (Kg/L) | 0.32 |
| Bulk Volume (L/Kg) | 4.6 |
| Melting Point (°C) | 255 |
| Sublimation Temperature (°C) |
350 |
| FDA | Y |
| EN71-3 | Y |
| EN71-9 | Y |
| APME AP89/1 | Y |
| CONEG EC94/62 | Y |
| FPL | - |
| China GB9685 | Y |
|
|
% Concentration + % TiO2 (1/3 ISD) | Heat Resistance (°C) |
| PET | 0.113% + 1% TiO2 (1/3 ISD) | 320 |
| PMMA | 0.155% + 1% TiO2 (1/3 ISD) | 300 |
| PC | 0.155% + 1% TiO2 (1/3 ISD) | 350 |
| ABS | 0.580% + 4% TiO2 (1/3 ISD) | 300 |
| PS | 0.300% + 2% TiO2 (1/3 ISD) | 300 |
| PA6/PA66 | 0.140% + 1% TiO2 (1/3 ISD) | 300 |
| Water | Acetone | Ethanol | Ethyl acetate |
Toluene | Heptane | Polyethylene glycol (PEG) | MMA |
| Insoluble | <5g/l | <5g/l | <5g/l | <5g/l | Insoluble | <5g/l | <5g/l |
| % Concentration + % TiO2(1/3 ISD) | Light Fastness | Weather Fastness Transparent 0.05% (3000 hrs) | Migration Transparent 0.05% | |
| PET | 0.113% + 1% TiO2 (1/3 ISD) | 3~4 | - | - |
| PMMA | 0.155% + 1% TiO2 (1/3 ISD) | 4 | 2~3 | 4~5 |
| PC | 0.155% + 1% TiO2 (1/3 ISD) | 5 | 2~3 | 4~5 |
| PS | 0.300% + 2% TiO2 (1/3 ISD) | 4~5 | 2 | 4~5 |
| PET | ● |
| PBT | ○ |
| PS | ● |
| HIPS | ● |
| ABS | ● |
| PC | ● |
| PMMA | ● |
| POM | ○ |
| SAN | ● |
| PA66/PA6 | ● |
| PES Fiber | ○ |
| ● recommended ○ potential use - not recommended | |
Copyright?2016 先尼科. All rights reserved. Powered by webfoss.
